Emulex Printer Server - Manual (Page 22)

16 Command Reference Guide
Define NetWare Node
Define NetWare nodes as a Remote Printer or Preferred File Server.
>
Server>> define node node_name [nfserver |npserver]
node_name The name of the node to be affected.
nfserver Defines the node as the Novell Preferred File
Server. Only one nfserver node may be defined.
npserver Defines the node to act as a Novell Remote
Printer. More than one npserver node may be
defined.
Delete Node
Remove nodes from the printer server’s internal node table.
>
Server>> [clear |purge |delete] node [node_name]
[all |ip ip_address |tcpip |gateway |nfserver
|npserver |syslog]
node_name Enter the name of the node to be deleted. This
is an optional entry.
all Enter this to delete all nodes except the one you
are on. All is the default.
ip_address Enter the IP address of the node to be deleted in
decimal dot notation. For example,
123.234.345.490
tcpip Removes the flag that designates the node as a
TCP/IP node in the printer server’s internal node
table.
gateway Removes the flag that designates the node as a
TCP/IP gateway, which allows communication
between network segments.
nfserver Removes the flag that designates the node as a
NetWare Preferred File Server.
npserver Removes the flag that designates the node as a
NetWare Remote Printer.
syslog Removes the flag that designates the node as a
TCP/IP syslog node; a node designated to
receive events or errors.