Emulex Printer Server - Manual (Page 26)

20 Command Reference Guide
Change Port Speed
Set the serial communication speed (baud rate) in bits per second.
>
Server>> [set |define |change] port port_num
[input |output] speed baud_rate
port_num The port affected by speed change.
input Enter the speed at which data is received. If
input speed is not chosen, the command sets
the speed in both directions.
output Enter the speed at which data is transmitted. If
output speed is not chosen, the command sets
the speed in both directions.
baud_rate Enter a speed: 75, 110, 134, 150, 300, 600,
1200, 2400, 1800, 2000, 2400, 4800, 9600,
19200, 38400.
Show Port Status - NETJet
Display port status for NETJet printer servers and MIO interfaces.
>
Server>> [show |monitor] port port_num status
[netjet |device]
port_num Enter the port number for which status is
desired.
netjet Gives the status for NETJet connected to MIO
interface (port 1).
device Gives the status of a Hewlett-Packard MIO
printer interface.