Electrolux EHD 60150 IAU - Manual (Page 6)

6 electrolux
Residual heat indicator
1
Warning: Risk of burns from residual
heat. After being switched off, the cook-
ing zones take some time to cool down.
Look at the residual heat indicator
.
Control bar
The heat setting and the power function are
set via the control bar. The heat setting indi-
cator consists of a chain of light elements.
3
If the control bar is touched for longer
than 6 seconds, a signal sounds and the
appliance switches itself off.
The induction cooking zones create the
heat required for cooking directly in the base
of the cookware. The glass ceramic is merely
heated by the residual heat of the cookware.
The cooling fan switches itself on and off
depending upon the temperature of the elec-
tronics.
Operating the appliance
3
Use the induction cooking zones with
suitable cookware.
Switching the appliance on and off
3
After switching on, within approx.
10 seconds a heat setting or a function
must be set, otherwise the appliance
automatically switches itself off.
Power function indicator
Operational readiness
indicator for cooking zone
Power function
Heat setting indicator
Heat setting selection Cooking zone Off
Control panel Display
To switch on Touch for 1 second lights up. The operational readiness
indicators of the individual cooking
zones also light up.
To switch off Touch for 1 second goes out. The operational readiness
indicators of the individual cooking
zones also go out.