Electrolux EHD 60150 IAU - Manual (Page 7)

electrolux 7
Setting the heat setting
The control bar is touched where the desired
heat setting is positioned. The heat setting is
shown in the display. Correct to the left or the
right, if necessary.
Do not release before the desired heat set-
ting is reached.
Locking/unlocking the control panel
The control panel, with the exception of the
“On/Off” sensor field, can be locked at any
time in order to prevent the settings being
changed e.g. by wiping over the panel with a
cloth.
3
When you switch the appliance off, the
locking function is automatically
switched off.
Turning the STOP+GO function
on and off
The STOP+GO function simultaneously tog-
gles all active cooking zones to keep-warm
mode then back to the heat setting they
were at before.
3
STOP+GO does not stop timer func-
tions.
3
STOP+GO controls the entire control
panel apart from the sensor field
.
Control panel Display
To switch on Touch lights up
To switch off Touch goes out
Control panel Display
To switch on Touch Keep-warm setting
To switch off Touch Previous heat setting (not automatic
warm-up or power function)