Saramonic UWMIC9S KIT2 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (514 to 596 MHz) - Manual (Page 3)

2
Detachable antennas
Group A output jack
Connect the RX9S to a video camera,
camcorder, mixer or amplifier with the
supplied output cables supplied.
Group B output jack
Connect the RX9S to a video camera,
camcorder, mixer or amplifier with the
supplied output cables.
RF-A indicator
The RF indicator displays the RF input level of
group A as follows:
Solid Blue: RF signal is strong.
Lights off: RF signal is disconnected.
IR/POWER indicator
Indicates the battery level as follows:
Solid blue: battery fully charged and
sufficient.
Solid Red: Battery low.
Charging Status:
Flashing Red: Charging.
General Introduction
The Saramonic UwMic9S wireless microphone
system provides a premium 2-person wireless
audio solution for Broadcast & TV, ENG,
filmmakers, vloggers, mobile journalists and
content creators for a remarkable price. It is
an easy-to-use, high-quality and flexible UHF
system. The external input allows the receiver
to be connected to a mic or line level device,
such as a shotgun microphone, mixer, recorder
or music player to capture additional sound or
music. The system can be powered through its
USB-C ports, allowing it to run for numerous
hours on a USB-C 5V power bank.
RX9S Portable Receiver
Introduction
The Saramonic RX9S is a camera-mountable
dual-channel UHF wireless receiver. It features
wide switching RF bandwidth, a high-contrast
OLED display and infrared synchronization
between transmitter and receiver. The two
detachable antennas can be rotated 360° for
better reception. The receiver's output can be
toggled between mono and stereo modes. The
low-cut function on the receiver minimizes low-
frequency rumble.
Product Structure