Saramonic UWMIC9S KIT2 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (514 to 596 MHz) - Manual (Page 5)

4
Output mode: The output mode can be set to
mono or stereo. When the output mode is in
mono, the audio from the left and right channel
will be mixed. When in stereo, receiver A's and
receiver B's audio output will be separated to
the left and right of the stereo output. If using
two transmitters, please make sure the ON/
OFF switch of the group A and B are set to ON.
System default is mono.
Input mode: The input mode can be set to Mic
in or Line in.
Mic in: for connecting a 3.5mm TRS microphone
to the receiver.
Line in: for connecting a line-level device to the
receiver.
System default: Mic in.
Low cut: Long press the SET button to turn the
low-cut function on or off.
To attenuate signals with frequencies lower than
150 Hz, the default is “Low Cut OFF.”
Local mic: Disable or enable the external input
by long pressing the SET button.
Enable: Allows the receiver to connect to an
external audio device.
Disable: The Mic/Line input jack of the receiver
cannot be used when set to “Disable.” Default is
“Disable.”
Home screen: If no operation is performed for
20 seconds on the other screens, the display will
automatically return to the home screen.
Group icon
Indicates the power of group A is turned off.
Indicates the power of group A is turned on.
RF level indicator
Indicates the current reception level.
Battery level indicator
Displays the battery level. Please charge the
devices immediately as soon as the indicator
starts flashing.
Name of the channel group
Current channel
Displays the current channel number.
Audio input level meter
Displays the audio input level.
Power key: Long press the SET button to
unlock or lock the power key. Lock the power
key to prevent the receiver being turned off
accidentally while in use.
•
Unlocked: Long press the power key to turn
the receiver on or off (System default).
• Locked: The receiver will not be turned off
even after the power key is pressed.
OLED Display Operation Guide