NETGEAR EAX12 AX1600 Wireless Dual-Band Wi-Fi 6 Mesh Extender - Manual (Page 70)

Factory Default Settings
To reset the extender to factory default settings, you can use the Reset button on the
side panel or you can log in and click the onscreen RESET button. For more information,
see Return the extender to its factory default settings on page 56.
The following table shows the factory default settings.
Table 10. Factory default settings
Default Settings Feature
Enabled Smart Setup
Enabled WiFi communication
NETGEAR_EXT WiFi network name (SSID)
Disabled Security
Auto 1 Transmission speed
Varies by region Country/region
802.11a/b/g/n/ac/ax Operating mode
Max 400 Mbps Data rate in the 2.4 GHz band
Disabled by default
(When enabled the max data rate is 1200 Mbps) Data rate in the 5 GHz band
Server and client are enabled DHCP
1
Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead lower actual
data throughput rate.
User Manual 70 Supplemental Information
AX1600 4-Stream WiFi 6 Mesh Extender