Synology RT6600 AX6600 Wireless Tri-Band 2.5G / Gigabit Router - Manual (Page 4)

4 Chapter 1: Before You Start
Synology RT6600ax at a Glance
5 1 2 3 4 6 7
10
11 9 8
1213
No. Article Name Location Description
1
USB 3.2 Gen 1
(Type-A) Port
Rear Panel
Connect an external drive, USB printer, or other types of USB
devices here.
2 WAN Port
Connect a network cable from the ISP modem into this port to
establish WAN connection.
3 2.5G WAN/LAN Port
1. Connect a network cable from the ISP modem into this port to
establish WAN connection.
2. Connect network cables into these ports to establish LAN
connection.
4 LAN Port
Connect network cables into these ports to establish LAN
connection.
5 Power Button Press to power on/off the Synology Router.
6 RESET Button
Press and hold for four seconds (Soft Reset) or for ten seconds
(Hard Reset).
7 Power Port Connect the AC power adapter here.
8 LAN Indicator
Front Panel
Displays the status of LAN connection.
9 WAN Indicator Displays the status of WAN connection.
10 Wi-Fi Indicator Displays the status of Wi-Fi connection.
11 STATUS Indicator Displays the status of the system.
12 WPS Button
Right Panel
Press to start WPS.
13 Wi-Fi Button Press for three seconds to turn on/off the Wi-Fi network.