Synology RT6600 AX6600 Wireless Tri-Band 2.5G / Gigabit Router - Manual (Page 9)

9 Chapter 2: Hardware Setup
Connect to Your RT6600ax
1 Use the included network cable to connect your RT6600ax (at the WAN1 port) to the ISP modem. Connect one
end of the power adapter to the power port on your RT6600ax, and the other end to the power outlet. Press
the power button to power on your RT6600ax. Wait for up to two minutes until the STATUS and WAN LED
indicators turn green.
2 Connect wireless client devices to your RT6600ax. When the Wi-Fi indicator has turned static green, RT6600ax
is ready to connect with other devices. Use your wireless device to scan and join the Wi-Fi network created by
your RT6600ax.
Note:
The default credentials for the Wi-Fi network:
• Wi-Fi SSID:
Synology_(Serial)
• Password: synology
You can change it during the initial SRM setup.