Troubleshooting – Whirlpool 27 Inch Ventless Electric Dryer Use and Car Guide User Manual

Page 15

Advertising
background image

15

TROUBLESHOOTING

If you experience

Possible Causes

Solution

Dryer Displaying Code Message or Cycle Status Indicator Lights Up

“LF”

Lint filter removed.

Indicates that the HybridCare™ filter has been removed. Place

filter into dryer and make sure the handle is properly seated.

“PF” (power failure)

The drying cycle has been interrupted

by a power failure.

Touch and hold START to restart the dryer.

NOTE:

The Control Lock function may be enabled when

recovering from a power failure. To unlock the control,

touch and hold CONTROL LOCK for at least 3 seconds.

“L2” Diagnostic Code

(low or no line voltage

condition)

There may be a problem with your

home power supply, keeping the

dryer’s heater from turning on.

The dryer will continue to run when this diagnostic code is

present. Touch any pad to clear the code from the display

and return to the estimated time remaining.

NOTE:

This error will only show during the initial installation.

Try the following:
Check to see if a household fuse has blown or circuit breaker

has tripped. Electric dryers use two household fuses or breakers.

Replace the fuse or reset the circuit breaker.
Confirm that the power cord is properly installed. Refer to

the Installation Instructions for details.
Select a Timed Dry heated cycle, and restart the dryer.
If the message persists, consult a qualified electrician.

“F# E#” (F1 E1, F3 E1,

etc.) variable service

codes

The dryer is in need of service.

If a code beginning with an “F” appears in the display,

alternating between F# and E#, the dryer control has

detected a problem that requires service. Call for service.

“Loc”

The Control Lock is enabled.

Touch and hold CONTROL LOCK for 3 seconds to unlock

the controls of the dryer. During this time the LED Display

will count down 3-2-1. When the Control Lock is disabled,

the LED Display will clear.

First try the solutions suggested here or visit our website at

www.whirlpool.com/product_help

-

In Canada

www.whirlpool.ca

for assistance and to possibly avoid a service call.

Advertising
This manual is related to the following products: