Touch power, Select type of load to dry, Adjust cycle modifiers, if desired – Whirlpool 27 Inch Ventless Electric Dryer Use and Car Guide User Manual
Page 9: Select any additional options, Select hybridcare™ energy options, Touch and hold start/pause to begin cycle, Remove garments promptly after cycle is finished
9
4.
Touch POWER
Touch POWER to turn on the dryer.
5.
Select type of load to dry
First select a cycle from the “What to Dry” (Automatic cycles)
and then select the “How to Dry” to get the best combination
cycle available for the type of items you are going to dry. See
“Cycle Guide” for cycle details. Not all cycles are available on all
models.
Automatic Cycles:
You can select a different dryness level, depending on your load.
Touch DRYNESS to scroll to Less to More. Selecting Less to
More automatically adjusts the dryness level at which the dryer
will shut off. Dryness level can be changed in the
first 5-8 minutes of the cycle.
Automatic Cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and dryness
setting.
NOTE:
Automatic Cycles will give you up to 4 temperatures to
adjust and it varies, depending on the “What to Dry” or “How to
Dry” selections that have been made.
TIMED DRY Cycle:
When you select Timed Dry/Quick, the default time appears in
the display. Touch MORE TIME or LESS TIME to increase or
decrease the time in 5 minute increments.
The default temperature may be changed by pressing
Temperature until the desired dry temperature is lit.
6.
Adjust cycle modifiers, if desired
You may adjust different settings, depending on
what you are drying and how you are going to
dry the item.
NOTE:
Not all options and modifiers are available with all cycles.
Not all cycles are on all models.
7.
Select any additional options
Add additional options such as Cycle Signal, Damp Dry Signal
and/or Wrinkle Shield™ by touching that option. If you will be
unable to remove the load promptly, select Wrinkle Shield™
before touching START/PAUSE.
NOTE:
Not all options and settings are available with all cycles.
8.
Select HybridCare™ Energy options
The display will show the HybridCare™ Energy Options for all
cycles. To adjust an option, touch its name – Speed or Eco.
NOTE:
All settings and options are not available with all
programs.
9.
Touch and hold START/PAUSE
to begin cycle
Touch and hold START/PAUSE to begin the cycle.
10.
Remove garments promptly
after cycle is finished
Promptly remove garments after cycle has completed
to reduce wrinkling.