Epson Prefection 2450 - Manual (Page 10)

6
Placing Your Document
Using Film Holders
Your scanner comes with three different film holders for film and slides. The film
holders ensure correct placement of your transparencies and make it easier to scan
them.
Film has two sides, a shiny base side and a dull emulsion side. The base side of the
film has the film maker’s name and film ID numbers printed on it. Always place the
shiny base side down.
1. To scan 35-mm film strips, 4
× 5-inch film, or 120/220 (6 × 9 cm) film, place the
film in the correct holder, as shown:
2. Place the holder with the film onto the scanner. Make sure the white triangle on
the holder points to the upper-right corner of the scanner.
35-mm strips 4 × 5-inch film 120/220 (6 × 9-cm) film
Perfection 2450.book Page 6 Tuesday, September 18, 2001 3:16 PM