Using silverfast se – Epson Prefection 2450 User Manual
Page 36
32
Advanced Scanning
Using SilverFast SE
You can use SilverFast SE as an alternative to the standard EPSON TWAIN software
that comes with your scanner. The easiest way of scanning with SilverFast SE is to use
ScanPilot.
®
This utility guides you through the best sequence of steps for achieving a
professional-looking image.
The first time you open SilverFast, you have to enter the serial number
printed on the label on your Scanner Software CD-ROM sleeve.
You can stop ScanPilot at any time by pressing the
stop button. Then
you can use the SilverFast control panel to make your settings manually.
1. Start your scan from within an image-processing application as described on
page 28. Be sure to select SilverFast SE as the scanner source.
2. When SilverFast SE opens, you see a screen like the one shown below. If you
don’t see the ScanPilot utility, click
.
click to show
ScanPilot
click to pre-scan
Perfection 2450.book Page 32 Tuesday, September 18, 2001 3:16 PM