Electrolux 41056VH - Manual (Page 56)

Instruction on setting up
56
1
Safety information for the installer
• The set up of the electrical installation is arranged so that the appliance can
be isolated from the mains with a minimum 3 mm all pole contact separation.
Suitable separation devices include e. g. cut outs, fuses (screw fuses are to be
taken out of the holder), RCD’s and contactors.
• Avoid installing the appliance next to doors and under windows. Otherwise
hot cookware may be knocked off the rings when doors and windows are
opened.
• The appliance must be connected to the electricity according to the connec
tion schematic on the outside of the terminal cover.
• The cable which connects the appliance to the mains must correspond to in
sulation standard H05VV F (=227 IEC 53) as a minimum.