Hypertec FastPrint Multiprotocol Ethernet/Fast Ethernet Print Server Hardware - Manual (Page 10)

2 Index
Windows NT, Windows 95/98, Windows for Workgroups, Microsoft
LAN Manager, IBM LAN Server
♦
AppleTalk
MacOS EtherTalk
Windows-based setup and administration software, EtherP Admin, is supplied
with the HyperNet Fastprint, making configuration and management quick
and easy. The HyperNet Fastprint also supports configuration and
management via the
telnet protocol for networks without Windows-
compatible machines.
External Features
This section describes the externally visible features of the HyperNet
Fastprint print server.
Port Connectors
The HyperNet Fastprint’s three printer ports are located on its rear panel.
Two identical parallel ports are labeled LPT1 and LPT2; the single serial port
is labeled COM. These printer ports are independently configurable using the
EtherP Admin program or the print server’s
telnet interface. (See the Print
Server Administration User’s Guide for information about configuring the
print server’s ports.)