Hypertec FastPrint Multiprotocol Ethernet/Fast Ethernet Print Server Hardware - Manual (Page 11)

Index 3
Network Cable Connector
The HyperNet Fastprint’s right side panel features an RJ-45 connector for
connection to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet
cabling (which should be Category 5 twisted-pair cable). The port supports
the NWay protocol, allowing the print server to automatically detect or
negotiate the transmission speed of the network.
DC Power Connector
The DC power input connector is located on the HyperNet Fastprint’s right
side panel and is labeled DC 12V.
Figure 1 -2 Print Server Right Side Panel