HONDA TRX420TE/FE - Manual (Page 120)

(2) (3)
RIGHT SIDE
(7)
(6)
(2) oil filter cover
(3) bolts
(4) oil filter
(5) O-rings (6) spring
(7) rubber seal
(8) ‘‘OUTSIDE’’ mark
(5) (4) (8)
(3)
(2)
112
Engine Oil & Filter
Servicing Your Honda
Improper installation of the oil f ilter can cause serious engine damage.
Remove the oil filter cover ( ) by removing the bolts ( ). Let the
remaining oil drain out. Discard the oil filter ( ) in an approved
manner (page
).
Check that the oil filter cover O-rings ( ) are in good condition and
then install a new oil filter. Use only the Honda genuine oil filter or a
filter of equivalent quality specified for your model. Using the wrong
Honda filter or a non-Honda filter which is not of equivalent quality
may cause engine damage.
Reposition the spring ( ) to the engine crankcase and install a new oil
filter with the rubber seal ( ) facing out, away from the engine. You
will see the ‘‘OUTSIDE (TOWARDS FILTER COVER)’’ mark ( )
on the filter body, near the seal.
3.
4.
5.
3 2
178
6
7
5
4
8
06/10/24 13:15:30 32HP4800_121