HONDA TRX420TE/FE - Manual (Page 23)

(1)
(1) multi-function display
15
Indicators & Displays
Instruments & Controls
Display Check.
When applicable, the reverse or neutral indicators come on when you
turn the ignition switch ON (
) and remain on until you shift out of
reverse or neutral.
When applicable, the 4WD indicator comes on when you turn the
ignition switch ON (
) and remains on until you shift out of 4WD
mode.
If one of these indicators does not come on when it should, have your
Honda dealer check for problems.
Display Check
When the ignition switch is turned ON (
), the multi-function display
( ) will temporarily show all the modes and digital segments so you can
make sure the liquid crystal display is functioning properly.
The displays are identified in the table on page with the words:
If any part of these displays does not come on when it should, have your
Honda dealer check for problems.
TRX420FE only:
1
17
06/10/24 12:59:38 32HP4800_024