HONDA TRX420TE/FE - Manual (Page 193)

185
If the Shift Switches Do Not Function
Taking Care of the Unexpected
Emergency Gear
Selection & Operation,
Emergency Gear
Selection & Operation,
If the Battery Is Low (or Dead),
If one or both shift switches do not function, see the following
instructions. If proper function cannot be restored, see your Honda
dealer.
When the engine is running:
Stop the ATV.
Turn the ignition switch to the ‘‘OFF’’ (
) position.
After the engine stops, turn the ignition switch to the ‘‘ON’’ ( )
position.
Press both shift switches and check that they are functioning.
If both switches are functioning, shift into neutral and restart the
engine.
If one or both switches are not functioning, see
page .
When the engine is stopped (ignition switch at ‘‘ON’’ ( )):
Turn the ignition switch to the ‘‘OFF’’ ( ) position.
Turn the ignition switch to the ‘‘ON’’ ( ) position.
Press both shift switches and check that they are functioning.
If both switches are functioning, shift into neutral and restart the
engine.
If one or both switches are not functioning, see
page .
When the battery is low (or dead):
See page .
1.
2.
3.
4.
5.
1.
2.
3.
4.
186
186
199
06/10/24 13:26:39 32HP4800_194