HP 4100TN - Manual (Page 118)

116 Chapter 4 - Problem solving EN
MEMORY SHORTAGE
PAGE SIMPLIFIED
The printer had to compress the job in order to fit it in available
memory. Some data loss might have occurred.
Press G O to continue.
The print quality of these pages may not be acceptable. Reduce the
complexity of these pages and reprint them.
Consider adding more memory to the printer (see “Printer memory
and expansion” on page 229).
NON HP TONER
DETECTED
alternates with
PRESS GO TO
CONTINUE
The printer has detected that the toner cartridge is not a genuine HP
toner cartridge. If you believe you purchased an HP toner cartridge,
call the HP fraud hotline (see “HP fraud hotline” on page 161). Any
printer repair required as a result of using non-HP toner is not covered
under the printer warranty.
OFFLINE
Press G O to place the printer online.
OUTPUT BIN FULL
alternates with
CLEAR PAPER FROM
[BINNAME ]
The output bin is full and needs to be emptied.
PAPER WRAPPED
AROUND FUSER
Turn the printer off to keep the paper from wrapping more firmly
around the fuser. Open the top cover and remove the toner cartridge.
Remove all visible paper. If you cannot locate the paper, leave printer
turned off and remove the fuser to remove paper (see “Clearing jams
from the fuser area” on page 107).
PERFORM PRINTER
MAINTENANCE
To ensure optimum print quality, the printer prompts you to perform
routine maintenance every 200,000 pages. (To order a printer
maintenance kit, see “Ordering information” on page 22. For
information on maintenance, see “Performing preventative
maintenance” page 93.)
PRINTER LANGUAGE
NOT AVAILABLE
A print job requested a printer language that does not exist in the
printer. The job will not print and will be cleared from memory.
Print the job using a driver for a different printer language, or add the
requested language to the printer (if available).
Press G O to continue.
PROCESSING AUTO
CLEANING PAGE
The printer is conducting the auto cleaning page process. This can
take up to 2.5 minutes.
PROCESSING
CLEANING PAGE
The printer is conducting the manual cleaning page process. This can
take up to 2.5 minutes.
RAM DISK DEVICE
FAILURE
The RAM disk had a critical failure and can no longer be used.
Printer messages (continued)
Message Explanation or recommended action