HP 6200 User Manual

Page 43

Advertising
background image

7.

Remove the drive from the drive bay as follows:

To remove a 5.25-inch drive in the desktop configuration, press down on the yellow
drivelock mechanism (1) and slide the drive from the drive bay (2).

CAUTION:

When the yellow drivelock is pressed, all the 5.25-inch drives are released so

do not tilt the unit and allow the drives to fall out.

Figure 2-17

Removing a 5.25-inch Drive in the Desktop Configuration (Optical Drive

shown)

To remove a 5.25-inch drive in the minitower configuration, pull up on the green drivelock
mechanism (1) for that specific drive and slide the drive from the drive bay (2).

Figure 2-18

Removing a 5.25-inch Drive in the Minitower Configuration (Optical Drive

shown)

ENWW

Removing a Drive from a Drive Bay

35

Advertising