HP 6200 User Manual
Page 90
Advertising
◦
Hold the drive and bracket firmly together and turn the assembly over. Install four M3
screws to secure the drive to the bracket.
Figure 3-30
Securing the Drive in the Adapter Bracket
7.
Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until
the drive snaps into place. The bottom bay is for the primary hard drive. The upper bay is for an
optional secondary hard drive.
Figure 3-31
Sliding a Hard Drive into the Drive Bay
82
Chapter 3 Microtower (MT) Hardware Upgrades
ENWW
Advertising