Henny Penny CLIMAPLUS LCG - Manual (Page 39)

38
PROG
START
PROG
START
+DELTA-T
Operation and settings
■ Turn unit on.
■ Load oven rack.
■ Insert IQT Sensor probe.
■ DO NOT select cooking mode. Deactivate if mode has already been selected.
■ Press IQT key: (“+PROFILE” appears in the adjacent display.) Use Central Dial
to select +DELTA-T.
■ Press PROG/START key to activate program. Pre-selected settings will appear
on the TEMPERATURE and IQT Sensor displays.
■ Press TEMPERATURE key and use Central Dial to enter desired Delta
temperature–68-140°F (20-60°C).
■ Press IQT Sensor key and use Central Dial to enter desired core
temperature–110-210°F (45-99°C).
■ Press PROG/START to confirm and initiate +Delta-T cooking.
During operation
■ Since +Delta-T cooking operates in Moist Heat mode, the ClimaPlus window
will display a blue bar and the Moist Heat mode key will be active during the
cooking cycle.
■ The actual core temperature will appear in the display next to “done” core
temperature.
■ The control panel is not accessible during operation except for the following
functions (may depend on model.)
• IQT, HACCP (all LCS and LCG models)
• Half Energy (all LCS Electric models)
• Half Fan Speed (all LCS Electric models and the LCG-40 Gas)
■ Opening the door during operation merely interrupts the cooking process.
When door is closed, all functions resume.
■ To stop the IQT +Delta-T program altogether, it is necessary to turn off the unit.
NOTE: For a Delta-T Cooking program without IQT Logic see “Special Functions:
Delta-T Cooking”, page 40.
COOKING
FUNCTIONS
IQT +DELTA-T
COOKING
continued