Henny Penny CLIMAPLUS LCG - Manual (Page 52)

51
Additional functions: Steam Injection
Steam Injection is a keypad function enabled in Dry Heat mode that, when
activated, sprays a four-second burst of water onto heating elements, creating
an immediate and brief humidified environment in the cooking cabinet.
Advantages
■ Improves rising and browning of dough.
■ Adds slight glaze to pastries.
■ Keeps foods, and especially skins and crusts from dehydrating.
■ Additional control for fruit, meat pastries and other items with varied textures,
densities and consistency.
Tips
■ Use Steam Injection sparingly. If ongoing humidity is desired, use Combination
Mode or Forced Steaming.
■ Use early in the baking process to improve dough and pastry rising.
■ Can be used in all program steps that use Dry Heat between 248°F and 482°F
(120-250°C). When programmed, a four-second burst occurs every two minutes.
Operation and settings
■ Steam Injection can only be activated when cooking in Dry Heat mode.
■ Cooking temperature must be set between 248°F and 482°F (120-250°C).
NOTE: Steam Injection will not operate until cabinet temperature is 248°F
(120°C) or higher.
■ To activate, press and hold STEAM INJECTION key. Hold for up to four
seconds per burst. Release to stop at any time.
■ Repeat as desired.
COOKING
FUNCTIONS