Henny Penny CLIMAPLUS LCG - Manual (Page 49)

48
PROG
START
PROG
START
@@@@@@@@@
UNLOCK
To Change Programming Password
IMPORTANT: If the pre-programmed password is changed and then forgotten,
it is only possible to deactivate the program locking system with a total reset
procedure. If a total reset must be performed all custom programs in the system
will be lost.
A password may consist of (1 to 8) letters, numbers and symbols.
To change the password, follow the procedures for “Locking/Unlocking” above to
enter the current password. If no new password has been entered, this will be the
factory set password: CLIMA+
■ When the complete password is entered, press the TEMPERATURE key to
toggle from PROG LOCK to UNLOCK.
■ Turn the Central Dial. The TIMER display shows the flashing cursor and
asterisks. Enter the new password in the same manner as above.
■ When finished, press the PROG/START key to submit the new password.
As a security measure, the TIMER display responds with a line of @ symbols,
with the first symbol flashing. Re-enter the new password to confirm.
■ Be sure PROG LOCK/UNLOCK is set to desired status.
■ Press the PROG/START key to save the new password and program locking
status.
Time, Temperature and Language Settings
The ClimaPlus ® Combi offers the operator the choice of:
Time formats:
■ Military (24:00)
■ Standard time (AM:PM)
Languages
■ English
■ Spanish
■ Portuguese
■ French
■ German
■ User choice
Temperature scales
■ Fahrenheit
■ Celsius
COOKING
FUNCTIONS
*********