Holder C-Trac 4.74 - Manual (Page 6)

149 443 5
C 4.74
Operating instructions
Instructions for the vehicle
This vehicle has received the type approval acc. to 74/150/
EEC after a safety inspection. The vehicle conforms to the
EMC (Electromagnetic Compatibility) requirements of direc-
tive 89/336/EEC. The regulations for exhaust gas identifi-
cation and the noise emissions are observed. The vehicle
must be registered and the licence plate must be attached
at the front and rear.
Intended Use
The vehicle can be used for towing trailers and for mounting
various implements. The maximum trailer load, which must
not be exceeded, is stated on the identification plate. The
transportation of persons is not allowed.
The vehicle is designed solely for the customary type of
operation in farming and forestry, the upkeep of municipal
facilities, including operation in winter.
The intended use also includes the performance of the speci-
fied maintenance. The vehicle and its implements may only
be used, serviced and repaired by persons familiar with this
equipment and have been warned of possible risks. The ap-
plicable safety regulations must be strictly observed, along
with all other recognized rules regarding industrial health,
safety at work and the highway traffic code.
Site of operation
The vehicle must be used in the open. Its operation on pub-
lic roads is allowed. Observe the applicable regulations in
your country for driving your vehicle on public roads.
Unintended applications
Any use not intended as described as above is an unin-
tended use. HOLDER will not be responsible for any hazard
which may result from unauthorized use. The manufacturer
will also not be responsible for any resulting damages; these
shall be solely borne by the user. The vehicle may not be
used for any other purposes than those described in this
manual. Do not carry persons on the load platform or on the
implements.