HP SL160Z - Manual (Page 13)

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for additional information.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration (choose one from each list unless otherwise noted)
Chassis HP ProLiant z6000 G6 Chassis
NOTE: ships with 2U chassis and 3 fans.
538080-B21
Server Node HP ProLiant SL160z G6 Server
NOTE: ships with two SL160z trays, each with 1 system board 570145-B21
Rail Kits HP ProLiant z6000 G6 2U rail kit
NOTE: 2U rail kit used for HP or 3rd part racks - allows addition of one z6000
chassis at a time.
570226-B21
HP ProLiant z6000 G6 10U Bulk rail kit
NOTE: 10U rail kit used for HP racks ONLY - allows addition of five z6000
chassis at a time.
570227-B21
Power Supply NOTE: Refer to HP Power Advisor when selecting a power supply for your
configuration,
www.hp.co/go/hppoweradvisor . Many HP ProLiant Servers now
offer new power options, including Common Slot Power Supplies. These power
supplies come in multiple power ratings and higher efficiency levels to offer the
Right Size solution to fit your configuration. This provides improved power
delivery and the advantage of reclaiming lost power. Prior to making a power
supply selection it is "highly recommended" that the "HP Power Advisor" is run to
determine the right size power supply for your server configuration. The HP
Power Advisor is located at: "
www.hp.com/go/proliant-energy-efficient " or
www.hp.com/go/hppoweradvisor
HP 460W CS HE Power Supply Kit 503296-B21
HP 750W CS HE Power Supply Kit 512327-B21
HP 1200W CS HE Power Supply Kit 500172-B21
Step 2: Choose Required Server Node Options (only one of the following from
each list unless otherwise noted)
Processors Quad-Core Processors
Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333,
HT, Turbo 2/2/3/3), FIO
NOTE: If 2 processors are desired, select one 539214-L21 and one 539214-
B21.
539214-L21
Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333,
HT, Turbo 2/2/3/3), FIO
NOTE: If 2 processors are desired, select one 570804-L21 and one 570804-
B21.
570804-L21
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066,
HT, Turbo 1/1/2/2), FIO
NOTE: If 2 processors are desired, select one 539212-L21 and one 539212-
B21.
539212-L21
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066,
HT, Turbo 1/1/2/2), FIO
NOTE: If 2 processors are desired, select one 539200-L21 and one 539200-
B21.
539200-L21
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Configuration Information - Factory Integrated Models
DA - 13385 Worldwide QuickSpecs — Version 1 — 6.15.2009 Page 13