HP SL160Z - Manual (Page 2)

Standard Slot 1: low-profile x16 PCI-Express 2.0
Optional Slot 2: low-profile internal only x4 PCI-Express 2.0
Management:
HP ProLiant Onboard Administrator Powered by Lights-Out 100 with optional LO100i Advanced Licenses for
Virtual KVM and Virtual Media
The HP ProLiant Easy Set-up CDs and ISO image downloads offer Assisted and Manual single server
installation, setup, and deployment capability. Capabilities provided are:
AutoRun
Assisted Installation Microsoft Windows 2003 Server and Microsoft Windows 2008 Server.
OS and SW available for Manual Installation are listed on each servers' QuickSpecs
HP Insight Diagnostics
Smart Components - a self-executable software consisting of driver and firmware
HP Smart Update Manager - a single system and multi-server deployment tool for Windows environments that
works with Smart Components to provide customers with easy-to-use GUI and Script-based deployment
capacity
SmartStart Scripting Toolkit - an automated scalable deployment utility
Insight Management Agents for environmental monitoring that is similar to and consistent with that of HP
ProLiant 300 series servers and above servers and that allows integration to HP Systems Insight Manager
(SIM).
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
Operating Systems and Virtualization Software Support for ProLiant Servers:
Supports Windows, RHEL, SLES, Solaris, VMware, and Citrix Essentials for XenServer
USB Ports:
Three USB ports (two front, one internal)
NOTE: In order to utilize the internal USB port the USB cable (P/N: 536769-B21) must be connected to the
internal USB header.
Optical Drive:
External support only
Power Supply:
The 2U chassis supports three power supply options:
Common Slot Power Supplies enable power capping and hot-pluggability
HP 1200W CS HE Silver Power Supply (Hot Plug, Autoswitching) (optional)
HP 750W CS HE Gold Power Supply (Hot Plug, Autoswitching) (optional)
HP 460W CS HE Gold Power Supply (Hot Plug, Autoswitching) (optional)
Form Factor:
HP ProLiant z6000 G6 Chassis - 2U
HP ProLiant SL160z Server - 1U server tray
Deployment/Serviceability:
HP ProLiant SL160z G6 models have two different rail kits to choose from:
10U bulk rail kit - Used to fit in HP 10000 series racks
One 10U bulk rail kit will hold up to five z6000 chassis, thus ten SL160z G6 servers
2U rail kit - Used to fit in 3rd party racks or to sell one z6000 chassis at a time
One 2U rail kit will hold one z6000 chassis, thus two SL160z servers
Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow
for greater flexibility in performing defective parts replacement
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. SATA hard
drives have a one year warranty. SAS Midline drives have a one-year warranty. SAS Enterprise drives have a
three-year warranty.
NOTE: Server Warranty includes 1 year Parts, 1 year labor, and 1 year on-site service. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1)
Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers
decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but
may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge.
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Overview
DA - 13385 Worldwide QuickSpecs — Version 1 — 6.15.2009 Page 2