Hitachi CP-A52 - Manual (Page 21)

21
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER
MY SOURCE/
AUTO
MAGNIFY VOLUME
࡯
ON
OFF
㧗
FREEZE
FOCUS D-ZOOM - + - +
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER
MY SOURCE/
AUTO
MAGNIFY VOLUME
࡯
ON
OFF
㧗
FREEZE
FOCUS D-ZOOM - + - +
Operating
1. Press AUTO button on the remote control.
Pressing this button performs the following.
Using the automatic adjustment feature
 For a computer signal
The vertical position, the horizontal position and the horizontal
phase will be automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
 For a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for the
VIDEO FORMAT item in the INPUT menu (34). The vertical position and horizontal
position will be automatically set to the default.
● The automatic adjustment operation requires approx. 10 seconds. Also please note
that it may not function correctly with some input. When this function is performed for
a video signal, a certain extra such as a line may appear outside a picture.
● The items adjusted by this function may vary when the FINE or DISABLE is selected
for the AUTO ADJUST item of the SERVICE item in the OPTION menu (47).
AUTO button
 For a component video signal
The vertical position, horizontal position and horizontal phase will be automatically set
to the default.
Adjusting the focus
Press the FOCUS + or FOCUS – button on the remote control, or
FOCUS + or FOCUS – button on the projector (5) while no menu
is on screen, to display the FOCUS box on screen. Use the FOCUS
+ and FOCUS – buttons to adjust the screen focus. After the focus
adjustment, wait for a while until the FOCUS box is disappeared, if
you want to display any other menu on screen by pushing the MENU
button on the projector.
● The ◄/►/▲/▼ buttons on the projector work only as the cursor
buttons while the template is displayed (43).
FOCUS + button
FOCUS – button