Hitachi CP-A52 - Manual (Page 34)

34
INPUT menu
INPUT menu (continued)
Item Description
VIDEO FORMAT
The video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ◄/► buttons to select the input port.
(2) Using the ▲/▼ buttons switches the mode
for video format.
AUTO ó NTSC ó PAL ó SECAM
N-PAL ó M-PAL ó NTSC4.43
• This item is performed only for a video signal
from VIDEO port or S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
FRAME LOCK
Set the frame lock function on/off for each port.
(1) Using the ▲/▼ buttons to select one of
following ports.
COMPUTER (IN)1 ó COMPUTER (IN)2
(2) Using the ◄/► buttons to turns the
frame lock function on/off.
TURN ON ó TURN OFF
• This item can be performed only on a signal with a vertical
frequency of 50 to 60 Hz.
• When the TURN ON is selected, a moving pictures are displayed
more smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select TURN OFF.
COMPUTER IN
The computer input signal type for COMPUTER IN1 and IN2 ports
can be set.
(1) Use the ◄/► buttons to select the input
port to be set.
COMPUTER (IN)1 ó COMPUTER (IN)2
(2) Use the ▲/▼ buttons to select the
computer input signal type.
AUTO ó SYNC ON G OFF
Selecting AUTO allows reception of sync on G signal.
• When AUTO is selected, the picture may be distorted with certain
input signals. In such a case, remove the signal connector first
and select SYNC ON G OFF on the menu, and then reconnect the
signal.
(continued on next page)