Hitachi CP-A52 - Manual (Page 29)

29
PICTURE menu
PICTURE menu (continued)
Item Description
COLOR TEMP
Using the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes
CUSTOM and then pressing the ► button or the
ENTER button displays a dialog to aid you in
adjusting the OFFSET and GAIN of the selected
mode.
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern ð Gray scale of 9 steps
Ramp  Gray scale of 15 steps
• When this function is performed, lines or other distortion may
appear.
COLOR
Using the ▲/▼ buttons adjusts the strength of whole color.
Strong ó Weak
• This item can be selected only for a video signal, s-video, or
component video signal.
TINT
Using the ▲/▼ buttons adjusts the tint.
Greenish ó Reddish
• This item can be selected only for a video signal, s-video, or
component video signal.
�
#2 MID CUSTOM
�
#3 LOW DEFAULT
�
#3 LOW CUSTOM
�
#1 HIGH DEFAULT � #1 HIGH CUSTOM � #2 MID DEFAULT
�
#6 Hi-BRIGHT-3 CUSTOM
�
#6 Hi-BRIGHT-3 DEFAULT
�
#5 Hi-BRIGHT-2 CUSTOM
�
#5 Hi-BRIGHT-2 DEFAULT � #4 Hi-BRIGHT-1 CUSTOM � #4 Hi-BRIGHT-1 DEFAULT
(continued on next page)