Hitachi CP-A52 - Manual (Page 37)

37
Item Description
PERFECT FIT
This item allows you to adjust the shape of the projected image in
each of the corners.
(1) Choose the corner to adjust using
the ▲/▼/◄/► buttons and press the
ENTER or INPUT button.
(2) Use the ▲/▼/◄/► buttons to adjust
the position of the corner.
Press the ENTER or INPUT button to
exit the adjustment of the corner.
(3) To adjust another corner, follow the
same procedure from (1) above.
To reset the adjustment of all the corners, select RESET using
the ▲/▼ buttons and press the ENTER or INPUT button.
• While this item is adjusted, keystone adjustment feature (36) is
unavailable. To correct the keystone distortion, reset the adjustment
of all the corners.
• The adjustable range of this correction will vary among inputs. For
some input, this function may not work well.
• This function will be unavailable when the Transition Detector is
on (53).
WHISPER
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL ó WHISPER
• When WHISPER is selected, acoustic noise and screen brightness
are reduced.
MIRROR
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
If the Transition Detector is TURN ON and MIRROR status is
changed, Transition Detector Alarm (53) will be displayed when
projector is restarted after the power switch is turned off.
SETUP menu
SETUP menu (continued)
(continued on next page)