7 recalibrate thermometer – Honeywell CT41A User Manual

Page 6

Advertising
background image

CT41A HEATING/COOLING THERMOSTAT

69-0788-2 6

7 RECALIBRATE THERMOMETER

If the thermostat setpoint and the thermometer reading
do not agree, the thermometer may need recalibration.

Follow this procedure:
❑

Remove thermostat cover.

❑

Set the cover on a table near an accurate
thermometer.

❑

After allowing five or ten minutes for stabilization,
compare the readings.

❑

If the readings are the same, replace the cover and
put the system into operation.

❑

If the readings are different, insert a hex head wrench
into the thermostat shaft and turn it until the
thermometers have the same reading. See Fig. 8.

❑

Replace cover and put the system into operation.

Fig. 8. Adjusting thermometer calibration.

M8068

BACKSIDE
OF COVER

THERMOMETER
SHAFT

HEX HEAD
WRENCH

Advertising