Hearth and Home Technologies QUADRA-FIRE 823-0170 - MBK - Manual (Page 13)

Isle Royale Wood Stove
R
March 21, 2013 250-5763F Page 13
OUTSIDE AIR
TERMINATION CAP
(contains rodent screen)
FLEX FLANGE
1 . Remove all materials from packing box.
 0RXQW WKH ÀH[ ÀDQJH ZLWK SLSH ¿WWLQJ H[WHQGLQJ RXW 
over the intake air opening at the rear of stove using the
four mounting screws supplied with kit.
 &XWDLQFK PP PLQLPXPKROHLQWKHÀRRURUZDOO
to accommodate outside air piping. Use 4 inch (102mm)
PHWDOÀH[RUULJLGSLSLQJWRGLUHFWO\FRQQHFWRXWVLGHDLUWR
the unit or into vented crawl space.
'RQRWSXWÀH[LQWR
a non-vented crawl space).
 ,IXVLQJÀH[WXELQJDWWDFKFDEOHWLHVWRVHFXUHWXELQJDW
both ends. Use the supplied termination cap with a rodent
VFUHHQ6HDOEHWZHHQWKHÀRRURUZDOODQGWKHSLSHZLWK
silicone to prevent moisture penetration.
Items Needed or Installation: 4 inch (102mm) diameter
ÀH[SLSHLQWKHOHQJWKDVUHTXLUHGIRU\RXULQVWDOODWLRQ 3KLO-
OLSVVFUHZGULYHU 6LOLFRQHVHDODQW 'ULOOVDQGVDZVQHFHVVDU\
IRUFXWWLQJKROHVWKURXJKWKHZDOORUÀRRULQJLQ\RXUKRPH
Included in it: ÀH[ÀDQJH FDEOHWLHV RXVWLGHDLUWHUPL-
QDWLRQFDS PRXQWLQJVFUHZV 'LVFDUGWKHUHPDLQLQJSDUWV 
C. Outside Air it Installation
NOTE: If you plan to install the optional blower and the
outside air kit, complete installation of the outside
air kit
¿UVW.
1. Remove 3 Phillips head screws from rear of unit.
2. Using the Phillips head screws, attach blower to lower
rear of stove, as shown.
3. Plug blower cord into a grounded outlet. Do not remove
ground prong from plug. Route power cord to avoid
heat from the stove, or other damage. Do not route
cord under or in front of appliance.
 $GMXVWWKHEORZHUVSHHGFRQWUROWRWKHGHVLUHGVSHHG
D. Installation Of Optional Blower
The blower is shipped fully assembled and ready
for installation.
* 7KHEORZHUVSHHGFRQWUROIRUWKLVXQLWLVDGMXVWHGDWWKHIDFWRU\
DQGQRUPDOO\GRHVQRWUHTXLUHIXUWKHUDGMXVWPHQW
Rear Shield
Blower Mounting
Flange
Blower Speed Control
Blower
Mounting
Flange
Rear
Shield
Figure 13.1
Figure 13.2