HP AFICIO SP 8100DN - Manual (Page 59)

Connecting the Printer
48
3
USB Connection
Important
❒ The USB2.0 cable is not supplied. Obtain a cable that is suitable for the com-
puter you are using.
❒ USB connection is possible under Windows Me/2000/XP, Windows Server
2003, Mac OS 9.x, and Mac OS X.
❒ Windows Me supports USB1.1 speeds.
❒ USB connection with Macintosh is only possible via the printer's USB port.
A
Connect the square-shaped connector of the USB2.0 cable to the USB port.
B
If the gigabit ethernet board is attached, connect the square-shaped connec-
tor of the USB2.0 cable to the USB port of the board.
The printer's ethernet and USB ports are not available when the gigabit eth-
ernet board is attached to the printer.
C
Connect the opposite end's flat connector to devices such as your compu-
ter's USB interface, or a USB hub.
Reference
For details about attaching the gigabit ethernet board, see p.38 “Attaching
Gigabit Ethernet Board”.
For details about settings for USB connection printing, see Software Guide.
AQV506S
AQV550S