HP AFICIO SP 8100DN - Manual (Page 70)

IEEE 802.11b (Wireless LAN) Configuration
59
4
H
Enter the channel using {T} or {U}, and then press the {q Enter} key.
I
Set [Trans. Speed] in the same way.
The factory default is [Auto]. If you need to change the transmitting speed de-
pending on environment you are using, select the appropriate transmitting
speed.
J
Print a configuration page to confirm the settings made.
Reference
For details about printing the configuration page, see “Printing the Test
Page”, Quick Installation Guide.
Setting SSID
If [Infrastructure] or [802.11 Ad hoc] is selected for [Comm. Mode], set SSID to use for
transmission.
Confirm the network administrator for SSID to use.
A
In the [IEEE 802.11b] menu, select [SSID] using {T} or {U}, and then press the
{q Enter} key.
If an SSID has been set, you can check the SSID setting.
B
select [Enter ID] using {T} or {U}, and then press the {q Enter} key.
C
Enter characters using {T} or {U}, and then press the {q Enter} key.
The number of character you have entered is displayed on the top right of the screen.
The characters that can be used are ASCII 0x20-0x7e (32 bytes), 16 digits.