HP AA-RTDRB-TE - Manual (Page 127)

Error Messages
127 Embedded Web Server User Guide
Error 117: Port Speeds
Cannot be Set at Higher
Data Rate than Switch
Speed
This request cannot be
completed because the
requested port speed is
faster than the
currently-configured
switch speed.
The switch speed should
first be configured to
accommodate changes in
the configured port
speed. The ports cannot
operate at a faster rate
than the switch, itself.
Update the switch speed
and resubmit the request.
Error 118: Invalid Port
Speed
This request cannot be
completed because the
requested port speed is
not recognized for this
product.
Port speeds may be set to
1 Gbps or 2 Gbps.
Update the port speed
and resubmit the request.
Error 119: Switch Speed
Not 2 Gb/sec
This request cannot be
completed because the
switch speed has not been
set to 2 Gbps.
The switch speed must be
set to 2 Gbps in order to
accommodate a port
speed of 2 Gbps. Update
the switch speed and
resubmit the request.
Error 134: Invalid
Membership List
Generic message to
indicate a problem in
either the switch binding
or fabric binding
membership list.
Be sure that the
membership list submitted
does not isolate a switch
already in the fabric. If
this is not the case, the
user needs to be aware of
all fabric security rules
and make sure that the list
submitted adheres
appropriately.
Error 135: Invalid
Number of Fabric
Membership List Entries
The number of fabric
members submitted
exceeds the maximum
allowable entries of 31.
The number of entries in
the fabric membership list
is limited to the total
number of domain ID's
available to the fabric.
Make sure that the list
(including the managed
switch) contains no more
than 31 entries.
Table 9: Embedded Web Serve Messages (Continued)
Message Description Action