HP AA-RTDRB-TE - Manual (Page 134)

Error Messages
134 Embedded Web Server User Guide
Error 228: Invalid Write
Authorization Argument
The write authorization
parameter does not
contain a valid value.
Parameters must be typed
exactly to specification to
be recognized correctly.
Error 229: Invalid UDP
Port Number
The udpPortNum
parameter does not
contain a valid value.
Parameters must be typed
exactly to specification to
be recognized correctly
by the system.
Error 230: Invalid WWN The wwn parameter does
not contain a valid value.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Error 231: Invalid Port
number
The portNum parameter
does not contain a valid
value.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Error 232: Invalid Domain
ID
The domainID parameter
does not contain a valid
value.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Error 233: Invalid
Member
The zone member added
is not valid.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Error 234: Invalid
Command
The system cannot
associate an action with
the submitted command.
The command may be
misspelled, required
parameters may be
missing, or the request
may not be applicable.
Consult the
documentation for the
command to be sure this
command was entered
correctly, all parameters
are valid and present,
and that the syntax is
correct.
Table 9: Embedded Web Serve Messages (Continued)
Message Description Action