haier DW-7777-01 - Manual (Page 7)

6
English
IN ADDITIoN foR NEW INsTAllATIoNs
Q. Electric drill with
R. 1/2”, 3/4”and 11/2” hole saw bits
S. Small tubing cutter
T. Wire stripper
U. 11/2”- 2” screw-type clamp if
connecting to waste-tee
V. Copper tubing (3/8” recommended) or flexible strainless steel braided fill line
W. Clamp connector or conduit connector to fit a 7/8”(2.2cm) diameter hole
pARTs supplIED
a. 2 drain hose clamps
1-large
1-small
b. 2 Self-Tapping 4.2 X 18 Philip’s-head screws
C. 7 Self-Tapping 3.5 X 13 Philip’s-head screws
D. Drain hose
E. Sound pad (DWL3525, 4035 and 7075 models only)
F. Sound Mat (DWL4035 and 7075 models only)
Make sure all these parts are included.
6
English
IN ADDITION FOR NEW INSTALLATIONS
Q. Electric drill with
R. ”, ”and 1 ” hole saw bits
S. Small tubing cutter
T. Wire stripper
U. 1 ”- 2” screw-type clamp if
connecting to waste-tee
V. Copper tubing ( ” recommended) or flexible strainless steel braided fill line
W. Clamp connector or conduit connector to fit a ”(2.2cm) diameter hole
PARTS SUPPLIED
A. 2 drain hose clamps
1-large
1-small
B. 2 Self-Tapping 4.2 X 18 Philip’s-head screws
D. Drain hose
E. Sound pad (DWL3525, 4035 and 7075 models only)
F. Sound Mat (DWL4035 and 7075 models only)
Make sure all these parts are included.
E
F
D
C
C. 7 Self-Tapping 3.5 X 13 Philip’s-head screws