HP 1040 User Manual
Page 39
Additional
features
Additional
features
Addition
al
fea
tures
Addition
al
features
Additional
features
Additional
features
Additional
features
Additional features 33
Answer/receive mode
!
When no document is loaded, press the Rcv.Mode/Contrast button until AUTO, FAX,
or TEL displays. If you are going to use the answering machine, we recommend
setting the Receive mode to AUTO.
NOTE:
If you want to use Distinctive Ring service from your phone company, set it up
and select it using the Rcv.Mode/Contrast button before turning on the answering
machine. See
•
Fax machine with few or no voice calls.
FAX mode
•
Using Distinctive Ring (DRPD) service to
set up a separate telephone number for
your HP Fax on the same physical line as
your other numbers.
•
Telephone with few or no fax calls
TEL mode
How are you going to use your HP Fax?
Read about...
•
AUTO
mode
•
In Ready mode,
AU
appears in the right hand corner of the
display.
•
When a call comes in, the machine answers it. If a fax is being
sent, the device receives the fax. If the HP Fax does not sense a fax
signal, it will ring in a different tone to tell you it may be a regular
telephone call. If you do not pick up the handset it will again
attempt to receive the fax after several more rings. If a greeting has
been recorded the HP 1050 Fax will turn on the answering
machine and attempt to record a message.
•
If you want to change the number of rings before it answers, see