HP 1040 - Manual (Page 10)

Quick start 4
Make a telephone call
5. Press !" to select the reduction or enlargement percentage you want (50 –125).
TIP: The maximum enlargement percent depends on the model you purchased.
6. Press Copy to start copying or press Start/Enter to go to the next option.
Collate
then
Off
will display.
7. Press !" to select
On
if you want the copies collated.
If Collate is
Off
, pressing either Copy or Start/Enter will start copying.
8. If Collate is
On
, press Copy to start copying or press Start/Enter to go to the next
option.
Print Order
then
Normal
will display.
9. Press !" to select
Reverse
if you want the last page printed first.
Printing the copies in reverse order will cause the first page to be on top when the copy
is complete.
10. Pressing either Copy or Start/Enter will start copying.
Make a telephone call
Use one of the following methods:
• Pick up the handset and dial the number.
• Press and hold a One Touch number. This turns on the speaker. When you are
connected, pick up the handset (HP 1050 Fax does not have to pick up handset since
it has a speakerphone.) For more information, see
One-touch dialing on page 24.
• Press the Speed Dial button, enter a speed dial code and press Start/Enter. This turns
on the speaker. When you are connected, pick up the handset (HP 1050 Fax does not
have to pick up handset as it has a speakerphone.) For more information, see
Dial from
the phone book on page 24.
• HP 1050 Fax: Press the Speakerphone button and dial the number.
NOTE: One touch and speed dial codes must have already been entered before you can
use them. For more information, see Store a number in the phone book on page 23.