Henny Penny 600 EN - Manual (Page 28)

Model 500/561/600
3-14. CHANGING THE
CHARCOAL FILTER
The charcoal filter should be changed every day or whenever it be-
comes clogged with crumbs. Proceed as follows:
1. Move the main power switch to the OFF position.
2. Remove and empty the condensation drain pan.
3. Disconnect the filter union and remove the filter drain pan from
beneath the frypot.
Use protective cloth or glove when disconnecting the
filter union and removing the charcoal filter assembly, or
severe burns could result.
If the filter pan is moved while full of shortening, use
care to prevent splashing, or severe burns could result.
4. An optional filter pan dolly can be used to safely transport filter
pan filled with hot shortening.
5. Discard shortening, or pump shortening back into frypot.
6. Wearing protective gloves or using a cloth, remove the charcoal
filter assembly from drain pan.
7. Set charcoal filter assembly on a counter or table and turn the 4
clips securing the charcoal pad frame, and pull frame from
assembly.
Step 3
Step 7
Step 7
3-28 205