Hitachi DH 45MR - Manual (Page 21)

21
English
5. Bolt plaching operation with Chemical Anchor (Rotation + Hammering)
6. Crushing (Hammering)
7. Groove digging and edging (Hammering)
8. Asphalt cutting (Hammering)
9. Digging
(1) Scoop
Code No. 313476
(1) Bull point
Overall length Code No.
11" (280 mm) 313471
15-3/4" (400 mm) 313472
(1) Cold chisel
Overall length Code No.
11" (280 mm) 313473
15-3/4" (400 mm) 313474
Overall length Width Code No.
15-3/4" (400 mm) 1-31/32" (50 mm) 313473
(1) Cutter
(Standard socket
on the market) (1) Chemical Anchor Adaptor
(SDS max shank)
Square dimensions of the side
Code No.
of the socket installation
1/2" (12.7 mm) 313469
3/4" (19.0 mm) 313470
01Eng_DH45MR_US 4/4/06, 10:23 21