Hitachi DH 45MR - Manual (Page 22)

22
English
10. Surface Roughing (Hammering)
11. Tamping (Hammering)
12. Syringe (for chip removal)
13. Hammer grease A
1.1 lbs (500 g) (in a can) Code No. 980927
0.15 lbs (70 g) (in a green tube) Code No. 308471
NOTE:
Specifications are subject to change without any obligation on the part of the HITACHI.
(1) Bushing Tool (2) Shank
Overall length Code No.
8-21/32" (220 mm) 313479
Code No. 313477
(1) Rammer (2) Shank
Overall length Code No.
8-21/32" (220 mm) 313479
Code No. 313478
Code No. 944575
01Eng_DH45MR_US 4/4/06, 10:23 22