Hitachi DH 45MR - Manual (Page 9)

9
English
Fig. 1
Front Cap
Housing
Stopper
Grip
Switch Trigger
Side Handle
Handle
Nameplate
Tail Cover
Set Screw
(Under the
Tail Cover)
Selector Lever
Brush Cap
(Inside the Tail Cover)
Dial
SPECIFICATIONS
Motor Single-Phase, Series Commutator Motor.
Power Source Single-Phase, 120 V 60 Hz
Current 11.6 A
Capacity Drill Bit: 1-3/4" (45 mm)
Core Bit: 4-29/32" (125 mm)
No-Load Speed 120 – 240/min
Full-load Blow 1250 – 2500/min
Weight 17.6 lbs (8.0 kg)
FUNCTIONAL DESCRIPTION
NOTE:
The information contained in this Instruction Manual is designed to assist you in the
safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read and
understood all safey instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that
differ from those on your own power tool.
NAME OF PARTS
Drill Bit
01Eng_DH45MR_US 4/4/06, 10:23 9