Hobart Welding Products CHAMPION ELITE OM-240 438E - Manual (Page 24)

.
A complete Parts List is available at wwwHobartWelders.com
OM-240 438 Page 20
4-6. Fuel Consumption
202 094-A
On a typical job using 1/8 in 7018
electrodes (125 amps, 20% duty
cycle), expect about 20 hours of op-
eration.
Welding at 150 amps at 40% duty
cycle uses approximately 3/4 gal-
lon per hour, or about 16 hours of
operation.
4-7. Generator Power Curve
240 425-A
The generator power curve shows
the generator power in amperes
available at the receptacles.