30 operation – HONDA EM5000is User Manual
Page 32
Advertising
30
OPERATION
Starting the engine with remote control (optional part)
ON
O
O
F
F
F
F
OFF
ENGINE SWITCH
REMOTE
PILOT LAMP
FUEL VALVE
START BUTTON
Determine the voltage requirements and adjust the voltage selector
switch, as needed.
Turn the fuel valve to the ON position.
Turn the engine switch to the REMOTE (far left) position.
Using the electric starter for more than 5 seconds at a time will
overheat the starter motor and can damage it.
If the engine fails to start within 5 seconds, release the button, and
wait at least 10 seconds before operating the starter again.
Press and hold the START button on the remote control until the
PILOT lamp illuminates. The START button will automatically be
disabled after the engine starts.
1.
2.
3.
4.
07/12/21 14:02:37 31Z11710_031
Advertising