HONDA EM5000is - Manual (Page 57)

55
SERVICING YOUR GENERATOR
EXHAUST TAIL PIPE
SPARK ARRESTER
6 mm FLANGE BOLT
6 mm FLANGE BOLTS
TORQUE:
TORQUE:
Remove the three 6 mm flange bolts, and remove the exhaust tail
pipe and the spark arrester.
Be careful to avoid damaging the screen.
Use a brush to remove carbon deposits from the spark arrester
screen.
The spark arrester must be free of breaks and tears. Replace the
spark arrester if it is damaged.
Install the spark arrester and the exhaust tail pipe in the reverse
order of removal.
8 lbf·ft (11 N·m , 1.1 kgf·m)
Install the muffler protector and the rear pipe in the reverse order of
removal.
6.3 lbf·ft (8.5 N·m , 0.87 kgf·m)
3.
4.
5.
.
6.
07/12/21 14:05:46 31Z11710_056