Hitachi CP-X265 - Manual (Page 33)

33
Item Description
COMPONENT
Using the buttons ▲/▼ switches the function of COMPONENT
VIDEO port.
COMPONENT ó SCART RGB
When the SCART RGB is selected, the COMPONENT VIDEO port
function as a port for a SCART RGB signal input and VIDEO port
function as a port for SCART RGB sync input. A SCART adapter
and SCART cable realize a SCART RGB input to the projector. For
details, contact your dealer.
VIDEO FORMAT
Set the video format for the s-video port and video port.
() Use th
e ◄/► buttons to select the input port.
(2) Using the buttons ▲/▼ switches the mode
for video format.
AUTO ó NTSC ó PAL ó SECAM
N-PAL ó M-PAL ó NTSC4.43
• This item is performed only for a video signal
from the VIDEO port or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (ex. an irregular picture, a color lack),
please select the mode depending on the input signal.
FRAME LOCK
Using the buttons ▲/▼ turns the frame lock function on/off.
TURN ON ó TURN OFF
• This item performs only at a RGB signal with vertical frequency of
50 to 60 Hz.
• When the TURN ON is selected, a moving picture is displayed
more smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select the TURN OFF.
RGB IN
Set the RGB input signal type for the RGB port.
() Use th
e ◄/► buttons to select the RGB
port to be set.
RGB ó RGB
(2) Use the ▲/▼ buttons to select the RGB
input signal type.
SYNC ON G ON ó SYNC ON G OFF
• Selecting TURN ON turns on the SYNC ON G mode. The SYNC
ON G mode allows reception of SYNC ON G.
• In the SYNC ON G mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and turn SYNC ON G off, and then reconnect
the signal.
INPUT Menu
INPUT Menu (continued)
4)$+0
4)$
5;0%10)1((
5;0%10)10
4)$
8+&'1(14/#6
58+&'1
#761
065%
2#.
5'%#/
065%
/2#.
02#.
8+&'1