HP PROLIANT ML330 G6 - Manual (Page 48)

Hardware options installation 48
WARNING: To reduce the risk of injury from electric shock hazards, do not open power
supplies. Refer all maintenance, upgrades, and servicing to qualified personnel.
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Be sure that you
are properly grounded (earthed) before beginning any installation procedure.
To install the component:
1. Identify the redundant power supply bay (" Rear panel components " on page 9 ).
IMPORTANT: Power supplies for the model shown are hot-pluggable. When using the
redundant power supply option, it is not necessary to power down the server before removing
or installing a power supply.
2. Remove the power supply blank.
WARNING: To reduce the risk of electric shock or damage to the equipment, do not connect
AC power cords to uninstalled power supplies.
3. Slide the power supply into the power supply bay until the release/lock lever clicks, securing the
power supply.